DESCRIPTION

Pr101 Adhesion Promoter is typically applied in a very thin layer to non-porous and porous construction finishes to increase the bonding capacity of Fenfa silicone construction sealants and adhesives.

CHARACTERISTICS

Ÿ           Available in clear

Ÿ           Expired primer turns milky

Ÿ           Fast evaporation time

Ÿ           Cleaner and primer for non-porous surfaces

APPLICATIONS

Ÿ           Enhance the adhesion of Fenfa construction sealants and adhesives on both porous and non-porous surfaces.

TYPICAL PROPERTIES

PACKAGING

This product is available in 500ml glass bottles.

LIMITATIONS

Ÿ           This product is not intended to be applied over backer rod.

Ÿ           This product is neither tested nor represented as suitable for medical or pharmaceutical uses.

APPLICATION

If this product is used as a cleaner and primer, the two-cloth wipe method of cleaning must be used. Using a cloth, apply a thin film of Pr101 Adhesion Promoter to a clean, non-porous surfaces and immediately wipe the primed area down with a second clean, dry cloth.

If this product is used only as a primer, apply Pr101 Adhesion Promoter to clean surfaces in a thin film using a cloth or brush before application of backer rod.

Sealant may be applied after primer has had time to dry (10 minutes in cold conditions, 5 minutes in warm conditions).

When this product is used in shop in conjunction with structural silicone, adhesion of the structurally glazed units must be verified before units are shipped to the jobsite. Specified daily adhesion testing and documentation are mandatory to avoid transportation of units that may not have developed full adhesion.

All surfaces cleaned and primed with Pr101 Adhesion Promoter should be sealed on the same day the primer is applied, no longer than 8 hours after application. If the sealant cannot be applied within this time, surfaces must be recleaned and reprimed before applying the sealant.

Pr101 Adhesion Promoter is also recommended in some highway and parking structure applications. Contact your local supplier of these BaiYun products for further information.

HANDLING AND SAFETY

This product is flammable. Smoking and open flames in the vicinity of this product may create a hazard for the user. Common sense and good safety practices are required.

Product safety information required for safe use is not included in this document.before handling,read product and material safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available from Fenfa sales application engineer, or distrbutor, or by calling Fenfa customer service.

USABLE LIFE AND STORAGE

When stored at or below 27ºC (80ºF) in the original unopened containers, this product has a usable life of 12 months from the date of manufacture.

PRODUCT SAFETY

Customers considering the use of any of Fujian Jinjiang Fenfa R&P Products CO., LTD. products should consult the latest Material Safety Data Sheets and labels for product safety information. Customers must evaluate Fujian Jinjiang Fenfa R&P Products CO., LTD. products and make their own determination as to fitness of use in their particular applications. For Material Safety Data Sheets contact the Fujian Jinjiang Fenfa R&P Products CO., LTD. sales office nearest you. Customers must ensure that all applicable federal, state, and local requirements have been met before handling any of the products mentioned in the text.

LIMITED WARRANTY INFORMATION – PLEASE READ CAREFULLY

The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer’s tests to

ensure that Fujian Jinjiang Fenfa R&P Products CO., LTD.’s products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.

Fujian Jinjiang Fenfa R&P Products CO., LTD.’s sole warranty is that the product will meet the Fujian Jinjiang Fenfa R&P Products CO., LTD. sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.

NOTICE:This information provided by us is reliable，but the actual situation  varies, we are impossible of know the all conditions ,so wo cannot guarantee the appropriateness and applicability in some uses.Users should kown the products detail,then determine the best  use methods